Showing 25 of 485 results
Filter by Manufacturer
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action |
---|
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ISL78420EVAL1Z
Renesas Electronics
|
1 | The ISL78420EVAL1Z evaluation board is designed for a user to evaluate the ISL78420 100V 2A half-bridge driver with tri-level PWM input for driving the gates of two NMOS FETs in a half-bridge configuration. These NFET MOSFETs are included on the evaluation board to evaluate a half-bridge driven load such as a DC motor or a synchronous switching regulator.The ISL78420 is offered in a 14 Ld HTSSOP package enhanced with a thermal EPAD. It operates from a supply voltage of 8V to 14V DC with the capability of dr | ISL78420EVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HIP9011EVAL1Z
Renesas Electronics
|
1 | The HIP9011EVAL1Z evaluation board is use to evaluate the HIP9011 engine knock signal processor. The HIP9011 is used to provide a method of detecting premature detonation often referred to as Knock or Ping in internal combustion engines.The HIP9011 can select between one of two sensors, if needed for accurate monitoring or for V-type engines. Internal control via the SPI bus is fast enough to switch sensors between each firing cycle. A programmable bandpass filter processes the signal from either of the sen | HIP9011EVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL6524EVAL1
Renesas Electronics
|
1 | The ISL6524EVAL1 evaluation board is a 4-output regulator solution targeted at supplying power to the microprocessor core (1.05V - 1.825V), AGTL+ communication bus (1.2V), 4X AGP video (1.5V), and the ICH/MCH chip set core (1.8V).The ISL6524 VRM8.5 PWM and triple linear power system controller provides the power control and protection for four output voltages in high-performance microprocessor and computer applications. The IC integrates one PWM controller and three linear controllers, as well as the monito | ISL6524EVAL1 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL6744EVAL1
Renesas Electronics
|
0 | ISL6744EVAL1 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ADL8101-EVAL1Z
Analog Devices
|
1 | 10 kHz to 22 GHz, Ultrawideband, Low Noise Amplifier | ADL8101-EVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL28233SOICEVAL1Z
Renesas Electronics
|
1 | The ISL28233SOICEVAL1Z evaluation board contains the circuitry needed to evaluate the high performance of the ISL28233 chopper stabilized op amp. The ISL28233 chopper stabilized rail-to-rail dual op amp features a low 8μV maximum VOS over-temperature and a 0.1Hz 1/f noise corner frequency enabling very high gain single-stage DC amplifiers that can operate from single cell batteries while consuming only 20μA of current.The ISL28233SOICEVAL1Z evaluation board can be configured as a precision high-gain (G = 10 | ISL28233SOICEVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EVAL_1EDF_G1_HB_GAN ?
Infineon
|
0 | EVAL_1EDF_G1_HB_GAN ? |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PI3741-00-EVAL1
VICOR
|
0 | PI3741-00-EVAL1 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL8206MEVAL1Z
Renesas Electronics
|
1 | The ISL8206MEVAL1Z evaluation board is used to evaluate the performance of the ISL8206M DC/DC power module. This board consists of power and load connectors for the source and load side, switches for PVCC bias selection and On/Off option, and other passive components. The input voltage range is from 1V to 20V, and the output voltage range is from 0.6V to 6V. Additional PVCC bias source is not required when using an input voltage of 5V or 12V. It can connect to the input side directly. However, in wider inpu | ISL8206MEVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL95210EVAL1Z
Renesas Electronics
|
0 | The ISL95210EVAL1Z evaluation board is used to evaluate the ISL95210 high-efficiency, 5V, 10A buck (step-down) regulator.Increasing demand for circuit board real estate necessitates the use of a higher integration to reduce component count. The ISL95210 regulator features integrated power MOSFET switches that are capable of delivering 10A continuous load current at elevated temperatures while maintaining high efficiency. Leveraging a highly digital feature set and the R4™ modulator allows the ISL95210 to pr | ISL95210EVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL8270MEVAL1Z
Renesas Electronics
|
1 | Easily evaluate the features of the ISL8270M digital DC/DC PMBus 25A module, including compensation-free ChargeMode™ control, soft-start delay and ramp times, supply sequencing, and voltage margining.The ISL8270MEVAL1Z evaluation board is a 3in x 4.5in 4-layer FR4 board with 2 oz. copper in all layers. This evaluation board comes with a placeholder for pin-strap resistors to adjust output voltage, switching frequency, input undervoltage (UVLO) protection threshold, and device PMBus address. Easily program o | ISL8270MEVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL8036CRSHEVAL1Z
Renesas Electronics
|
1 | The ISL8036CRSHEVAL1Z evaluation board is intended for use by individuals with requirements for point-of-load (POL) applications sourcing from 2.85V to 6V. This board is used to demonstrate the performance of the ISL8036 low quiescent current mode converter in a current sharing configuration.The ISL8036 is an integrated power controller rated for dual 3A output current or current sharing operation with a 1MHz step-down regulator, which is ideal for any low power low-voltage applications. The channels are 18 | ISL8036CRSHEVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL62386HIEVAL1Z
Renesas Electronics
|
1 | The ISL62386HIEVAL1Z evaluation board is used to demonstrate the performance of the ISL62386 quad-output voltage controller. The ISL62386 includes two pulse-width modulated (PWM) controllers featuring Renesas' patented R3™ technology and two linear regulators, LDO5 and LDO3. The PWM controllers are adjustable from 0.6V to 5.5V, and the LDOs generate fixed 5V and 3.3V outputs respectively.The evaluation board includes independent enable switches, one LED power-good (PGOOD) indicator and numerous test points. | ISL62386HIEVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL6308AEVAL1Z
Renesas Electronics
|
1 | The ISL6308AEVAL1Z evaluation board is used to evaluate the ISL6308A 3-phase PWM controller and embodies an 85A to 90A regulator solution targeted at supplying power to the designated load. The physical board design is optimized for 3-phase operation and ships out configured to provide one of the following four output voltages (0.6V, 0.9V, 1.2V, and 1.5V) depending on choice of the REF1, REF0 combination set by DIP switch U2, but can be easily modified to provide any output voltage values in the range of 0. | ISL6308AEVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL28268SOICEVAL1Z
Renesas Electronics
|
0 | ISL28268SOICEVAL1Z |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL8105BEVAL1Z
Renesas Electronics
|
0 | ISL8105BEVAL1Z |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PI3424-00-EVAL1
VICOR
|
0 | PI3424-00-EVAL1 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CYW943907AEVAL1F
Infineon
|
1 | CYPRESS - INFINEON TECHNOLOGIES - CYW943907AEVAL1F - Evaluation Kit, CYW43907 WICED IEEE 802.11 a/b/g/n SoC, On Board PCB Antenna, Arduino Headers | CYW943907AEVAL1F |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL6255EVAL1Z
Renesas Electronics
|
1 | The ISL6255EVAL1Z (QSOP) evaluation kit includes all the circuitry needed to demonstrate the capabilities of the ISL6255 lithium-ion battery charger.The ISL6255 is a highly integrated battery charger controller for Li-ion and Li-ion polymer batteries. High efficiency is achieved by a synchronous buck topology and the use of a MOSFET, instead of a diode, for selecting power from the adapter or battery. The low-side MOSFET emulates a diode at light loads to improve the light load efficiency and prevent system | ISL6255EVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL59420EVAL1
Renesas Electronics
|
1 | The ISL59420EVAL1 evaluation board contains all the circuitry needed to characterize critical performance parameters of the ISL59420 single 2:1 multiplexing amplifier, over a variety of applications. The ISL59420 is a single-output, gain-selectable 2:1 MUX amp. The unity-gain bandwidth is 400MHz for this IC. It contains a common set of logic inputs for channel selection (S), three-state output control (HIZ) and an enable control input that powers down the device (EN).The evaluation board circuit and layout | ISL59420EVAL1 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL32741EVAL1Z
Renesas Electronics
|
1 | The ISL32741EVAL1Z board enables the evaluation of the ISL32741EIBZ reinforced isolated, half-duplex RS-485 transceiver in a typical bus node application, used in isolated industrial networks.The ISL32741E is a galvanically isolated, high-speed differential bus transceiver, and provides 40Mbps bidirectional data communication for Industrial IoT (IIoT) networks. The device uses giant magnetoresistance (GMR) as its isolation technology.The ISL32741E offers 1,000VRMS working voltage and 6kV of reinforced isola | ISL32741EVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL705XRHEVAL1Z
Renesas Electronics
|
1 | The ISL705XRHEVAL1Z evaluation board is a design platform featuring the ISL705ARH, ISL705BRH and ISL705CRH 5V supervisory circuits. It includes all the circuitry needed to characterize critical performance parameters and enables evaluation of basic functional operation and common application implementations.ISL705xRH family of devices are radiation hardened 5.0V/3.3V supervisory circuits that reduce the complexity required to monitor supply voltages in microprocessor systems. These devices significantly imp | ISL705XRHEVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
PI3749-00-EVAL1
VICOR
|
0 | PI3749-00-EVAL1 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL6537-6506EVAL1
Renesas Electronics
|
0 | ISL6537-6506EVAL1 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL6700EVAL1Z
Renesas Electronics
|
1 | The ISL6700EVAL1Z evaluation board enables rapid construction of an isolated DC/DC converter in several configurations. The board consists of the ISL6700 half-bridge driver IC, two IRFR120 MOSFETs, a bootstrap diode, a bootstrap capacitor, and two input voltage decoupling capacitors. The ISL6700 can operate at frequencies in excess of 500kHz and has typical propagation delay times of 30ns. It has 1.25A of output drive capability and can switch an IRFR120 load with rise and fall times of less than 20ns. | ISL6700EVAL1Z |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||