Showing 25 of 1310 results
Filter by Manufacturer
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action |
---|
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
662004230822
Würth Elektronik
|
1 | Wurth Elektronik, WR-MPC3, 4 Way, 2 Row, Right Angle PCB Header | Other | 662004230822 |
2
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
74438323082
Würth Elektronik
|
1 | WE-MAPI SMD Shielded Power Inductor, 2510, 8.2uH | Inductors Chip | 74438323082 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
662020230822
Würth Elektronik
|
1 | Wurth Elektronik WR-MPC3 Series, Series Number 6620, 3mm Pitch 20 Way 2 Row Right Angle PCB Header, Solder Termination | Other | 662020230822 |
2
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2-00-44-00-00-07-0
Mill-Max
|
1 | Circuit Board Hardware - PCB 300u AG OVER CU | Other | 2308-2-00-44-00-00-07-0 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MAL217230821E3
Vishay
|
1 | Aluminum Electrolytic Capacitors Radial Miniature, Low Impedance, Automotive Grade | Capacitor, Polarized Radial Diameter | MAL217230821E3 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2DCGI
Renesas Electronics
|
1 | The 2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The 2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the i | Small Outline Packages | 2308-2DCGI |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2DCGI8
Renesas Electronics
|
1 | The 2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The 2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the i | Small Outline Packages | 2308-2DCGI8 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2-00-80-00-00-07-0
Mill-Max
|
1 | Circuit Board Hardware - PCB 200u SN OVER NI | Other | 2308-2-00-80-00-00-07-0 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2HDCGI8
Renesas Electronics
|
1 | The 2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The 2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the i | Small Outline Packages | 2308-2HDCGI8 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2DCG8
Renesas Electronics
|
1 | The 2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The 2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the i | Small Outline Packages | 2308-2DCG8 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2HPGGI
Renesas Electronics
|
1 | The IDT2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The IDT2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, an | Small Outline Packages | 2308-2HPGGI |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
662002230822
Würth Elektronik
|
1 | 3.00MM MALE DUAL ROW SMT RIGHT ANGLE HEADER WITH THROUGH HOLE RETENTION METAL CLIP | Other | 662002230822 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2HDCGI
Renesas Electronics
|
1 | The 2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The 2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the i | Small Outline Packages | 2308-2HDCGI |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2DCG
Renesas Electronics
|
1 | The 2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The 2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the i | Small Outline Packages | 2308-2DCG |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2HPGG8
Renesas Electronics
|
1 | The IDT2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The IDT2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, an | Small Outline Packages | 2308-2HPGG8 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2HDCG
Renesas Electronics
|
1 | The 2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The 2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the i | Small Outline Packages | 2308-2HDCG |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308-2HPGGI8
Renesas Electronics
|
1 | The IDT2308 is a high-speed phase-lock loop (PLL) clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The IDT2308 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, an | Small Outline Packages | 2308-2HPGGI8 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
230821-000
TE Connectivity
|
1 | Circular Connector Adapter | 230821-000 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308234-8
TE Connectivity
|
1 | Body Features: Cable Exit Angle 180° | Cable Exit Type Straight to Straight | Body Material PA GF | Configuration Features: Number of Positions 4 | Snap-Lock With | Contact Features: Mating Tab Width .031 INCH | Contact Type Tab | Mating Tab Thickness .01 INCH | RF Connector Center Contact Plating Material Tin | Contact Current Rating (Max) 1 AMP | Center Contact With | Mating Tab Thickness .25 MM | Contact Mating Area Plating Material Gold | Mating Tab Width .8 MM | Dimensions: Connector Height .793 INCH | 2308234-8 |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308234-5
TE Connectivity
|
0 | Body Features: Body Material PA GF | Cable Exit Type Straight to Straight | Cable Exit Angle 180° | Configuration Features: Number of Positions 5 | Snap-Lock With | Contact Features: Contact Mating Area Plating Material Gold | RF Connector Center Contact Plating Material Tin | Mating Tab Width .8 MM | Mating Tab Thickness .25 MM | Center Contact With | Contact Current Rating (Max) 1 AMP | Contact Type Tab | Mating Tab Thickness .01 INCH | Mating Tab Width .031 INCH | Dimensions: Product Width .94 INCH | Pr | 2308234-5 |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
230829
ANCOR
|
0 | 230829 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308234-4
TE Connectivity
|
0 | Body Features: Body Material PA GF | Cable Exit Angle 180° | Cable Exit Type Straight to Straight | Configuration Features: Snap-Lock With | Number of Positions 6 | Contact Features: Contact Current Rating (Max) 1 AMP | Contact Type Tab | Mating Tab Width .031 INCH | Mating Tab Thickness .01 INCH | Center Contact With | Mating Tab Width .8 MM | Contact Mating Area Plating Material Gold | Mating Tab Thickness .25 MM | RF Connector Center Contact Plating Material Tin | Dimensions: Connector Height 20.15 MM | | 2308234-4 |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308234-1
TE Connectivity
|
0 | Body Features: Cable Exit Angle 180° | Body Material PA GF | Cable Exit Type Straight to Straight | Configuration Features: Number of Positions 6 | Snap-Lock With | Contact Features: Contact Current Rating (Max) 1 AMP | Mating Tab Thickness .01 INCH | Center Contact With | Contact Type Tab | Mating Tab Width .8 MM | RF Connector Center Contact Plating Material Tin | Mating Tab Thickness .25 MM | Contact Mating Area Plating Material Gold | Mating Tab Width .031 INCH | Dimensions: Product Width .94 INCH | Pr | 2308234-1 |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308253-4
TE Connectivity
|
0 | Body Features: Cable Exit Angle 180° | Body Material PA GF | Cable Exit Type Straight to Straight | Configuration Features: Snap-Lock With | Number of Positions 6 | Contact Features: Mating Tab Width .8 MM | RF Connector Center Contact Plating Material Tin | Contact Mating Area Plating Material Gold | Mating Tab Thickness .25 MM | Contact Type Socket | Mating Tab Thickness .01 INCH | Mating Tab Width .031 INCH | Contact Current Rating (Max) 1 AMP | Center Contact With | Dimensions: Product Length 33.35 MM | 2308253-4 |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2308253-1
TE Connectivity
|
0 | Body Features: Cable Exit Angle 180° | Cable Exit Type Straight to Straight | Body Material PA GF | Configuration Features: Number of Positions 4 | Snap-Lock With | Contact Features: Contact Current Rating (Max) 1 AMP | Contact Mating Area Plating Material Gold | Center Contact With | RF Connector Center Contact Plating Material Tin | Contact Type Socket | Mating Tab Width .8 MM | Mating Tab Thickness .01 INCH | Mating Tab Thickness .25 MM | Mating Tab Width .031 INCH | Dimensions: Connector Height .874 IN | 2308253-1 |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||