Description:The 5962-88662 (71256 SRAM) is organized as 32K x 8. This part offers a reduced power standby mode for significant system level power and cooling savings. Fully static asynchronous circuitry is used; no clocks or refreshes are required for operation.
Renesas provides a recommended PCB layout guide in their application note (APL-AN-1201) for thermal management. It suggests using a 4-layer PCB with a thermal vias array under the package, and a solid ground plane on the bottom layer to reduce thermal resistance.
Renesas recommends following the guidelines in their reliability handbook (Renesas Reliability Handbook, Rev. 2.00) for high-temperature operation. This includes derating the device, using a heat sink, and ensuring proper thermal management.
Renesas recommends using a low-ESR ceramic capacitor (X5R or X7R dielectric) with a capacitance value between 4.7 μF to 10 μF, and a voltage rating of at least 10 V. The ESR should be less than 100 mΩ.
Renesas provides a troubleshooting guide in their application note (APL-AN-1202) for output voltage regulation issues. It suggests checking the input voltage, output load, and feedback network, as well as verifying the device's operating frequency and compensation network.
Renesas recommends following the soldering conditions specified in their packaging and soldering guidelines document (Renesas Packaging and Soldering Guidelines, Rev. 2.00). The recommended soldering temperature is between 240°C to 260°C, with a peak temperature of 260°C for no more than 10 seconds.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
5962-8866205XA Overview
Use the download button to access the 5962-8866205XA schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like 5962-,
or try a keyword search, such as SRAMs
