Description:The 6V49205A is a main clock for Freescale P10xx and P20xx-based systems. It has a selectable System CCB clock and a 66.66MHz DDRCLK. The 6V49205A also provides LP-HCSL PCIe outputs for low power and reduced board space.1 – Sys_CCB 3.3V LVCMOS output at 100M/83.33M/80M/66.66M1 – DDRCLK 3.3V LVCMOS output at 66.66M1 –125M 3.3V LVCMOS output6 – LP-HCSL PCIe pairs selectable at 100M or 125M6 – 25MHz 3.3V LVCMOS outputs2 – 2.048M 3.3V LVCMOS outputs2 – USB 3.3V LVCMOS outputs at12M or 24M
Renesas provides a recommended PCB layout guide in their application note (APL-AN-1201) for thermal optimization. It suggests using a 4-layer PCB with a solid ground plane, placing thermal vias under the package, and using a thermal pad on the bottom side of the PCB.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended operating conditions, use a suitable thermal design, and implement thermal monitoring and protection mechanisms. Renesas also recommends using a thermal interface material (TIM) between the device and the heat sink.
The datasheet provides general guidelines for the input and output capacitors, but Renesas recommends using a low-ESR capacitor (e.g., ceramic or film capacitor) with a value between 10uF to 22uF for CIN and a value between 10uF to 47uF for COUT. The specific requirements may vary depending on the application and operating conditions.
To troubleshoot issues with the power-good (PG) signal, check the voltage levels, ensure proper connection to the PG pin, and verify that the input voltage is within the recommended range. Also, check for any noise or oscillations on the input or output lines that may affect the PG signal.
Operating the device outside the recommended operating conditions can lead to reduced performance, decreased reliability, and potentially cause damage to the device. It's essential to follow the recommended operating conditions, including voltage, current, and temperature ranges, to ensure reliable operation and prevent damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
6V49205APAG Overview
Use the download button to access the 6V49205APAG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 6V492,
or try a keyword search, such as Clock Generators
