Please enter a minimum 3 letters or numbers
Technical Content
Part Image

8T39S11ANLGI - Renesas Electronics

Description: The 8T39S11A is a high-performance clock fanout buffer. The input clock can be selected from two differential inputs or one crystal input. The internal oscillator circuit is automatically disabled if the crystal input is not selected. The crystal pin can be driven by a single-ended clock.The selected signal is distributed to ten differential outputs which can be configured as LVPECL, LVDS or HSCL outputs. In addition, an LVCMOS output is provided. All outputs can be disabled into a high-impedance state. The

Download 8T39S11ANLGI Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
8T39S11ANLGI - Renesas Electronics - PCB symbol
click to zoom
PCB Footprints
8T39S11ANLGI - Renesas Electronics PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - NLG48P1__
click to zoom
3D Models
8T39S11ANLGI - Renesas Electronics - 3D model - Quad Flat No-Lead - NLG48P1__
click to zoom

8T39S11ANLGI Details

  • Manufacturer Part Number:

    8T39S11ANLGI

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    VFQFPN

  • Package Description:

    VFQFPN-48

  • Pin Count:

    48

  • Manufacturer Package Code:

    NLG48P1

  • Country Of Origin:

    Taiwan, Thailand

  • HTS Code:

    8542.39.00.01

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Logic IC Type:

    LOW SKEW CLOCK DRIVER

8T39S11ANLGI Frequently Asked Questions (FAQs)

  • The recommended power-up sequence is to apply VDD first, followed by VDDA and VDDIO. This ensures that the internal voltage regulators are powered up correctly.
  • The clock sources can be configured using the Clock Control Register (CCR). The CCR allows selection of the clock source, clock frequency, and clock mode. Refer to the datasheet for specific register settings.
  • The maximum frequency for the SPI interface is 50 MHz. However, this may vary depending on the specific application and system design.
  • The 8T39S11ANLGI has a built-in watchdog timer (WDT) that can be enabled and configured using the Watchdog Timer Control Register (WTCSR). The WDT can be used to reset the device in case of a software fault or hang.
  • The maximum operating temperature range for the 8T39S11ANLGI is -40°C to +125°C. However, the device may not function correctly at the extreme ends of this range, and thermal design considerations should be taken into account.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

8T39S11ANLGI Overview

Use the download button to access the 8T39S11ANLGI schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 8T39S, or try a keyword search, such as Clock Generators

Parts related to 8T39S11ANLGI

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑