The maximum safe operating temperature for the BC368 is 150°C, but it's recommended to operate it at a maximum of 120°C to ensure reliability and longevity.
While the BC368 can be used as a switch, it's not recommended for high-frequency circuits due to its relatively high transition frequency (ft) of 300 MHz. For high-frequency applications, consider using a transistor with a higher ft, such as the BC817 or BC337.
To ensure the BC368 is fully saturated, apply a base current that is at least 1/10th of the collector current. Additionally, ensure the base-emitter voltage (Vbe) is around 0.7V to 0.8V, and the collector-emitter voltage (Vce) is less than 0.5V.
The minimum base current required to turn on the BC368 is around 5-10 mA, but this can vary depending on the specific application and operating conditions. It's recommended to consult the datasheet and application notes for more information.
While the BC368 can be used in a linear amplifier circuit, it's not the most suitable choice due to its relatively low current gain (hFE) and high collector-emitter saturation voltage (Vce(sat)). Consider using a transistor with a higher hFE and lower Vce(sat), such as the 2N3904 or 2N4401.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
BC368 Overview
Use the download button to access the BC368 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Small Signal Bipolar Transistors
