CSS2725FTL500 footprint, schematic symbol and 3D model by Stackpole Electronics, Inc.

Symbol

PCB Footprints

3D Models

CSS2725FTL500 Details

A symmetrical layout with the sense resistor placed close to the power source and the sense lines routed away from noise sources is recommended. Use a 4-layer PCB with a solid ground plane to minimize noise and ensure accurate current sensing.
The power rating can be calculated using the formula: P = I² * R, where P is the power in watts, I is the maximum current in amps, and R is the resistance in ohms. Ensure the calculated power rating does not exceed the maximum power rating specified in the datasheet.
A soldering profile with a peak temperature of 260°C (500°F) and a dwell time of 10-15 seconds is recommended. Ensure the soldering process is done in a nitrogen atmosphere to prevent oxidation.
To ensure accurate current sensing, ensure the sense lines are routed away from noise sources, use a low-noise amplifier, and implement a proper calibration procedure to account for any offset or gain errors.
The operating temperature range for the CSS2725FTL500 is -40°C to 150°C. However, the device's accuracy and stability may be affected at extreme temperatures. Consult the datasheet for specific temperature-related specifications.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the CSS2725FTL500 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like CSS27, or try a keyword search, such as Fixed Resistors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →