A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the EMI9404MUTAG close to the antenna and use a short, direct connection to minimize radiation.
Use a network analyzer to measure the antenna's impedance and adjust the matching network components (L1, C1, and R1) to achieve a 50-ohm match.
The EMI9404MUTAG can handle up to 2W of continuous power, but it's recommended to derate the power to 1W or less for reliable operation.
Use a spectrum analyzer to measure the EMI radiation, and check for proper PCB layout, component placement, and antenna matching. Ensure that the EMI9404MUTAG is properly soldered and that there are no signs of damage or overheating.
Yes, but ensure the antenna is designed for the same frequency band and has a similar impedance to the recommended antenna. You may need to adjust the matching network components to achieve optimal performance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
EMI9404MUTAG Overview
Use the download button to access the EMI9404MUTAG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like EMI94,
or try a keyword search, such as Data Line Filters
Suggested Parts
If you searched for EMI9404MUTAG, you might also be interested in these parts:
