The recommended land pattern for ERJ14YJ2R0U is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJ14YJ2R0U should be placed on a flat, even surface to prevent tombstoning. The component should be aligned with the PCB pads and the solder paste should be applied evenly. The recommended reflow temperature profile is 250°C for 10-30 seconds.
The ERJ14YJ2R0U is a general-purpose resistor and is not specifically designed for high-frequency applications. However, it can be used up to 100 MHz with minimal signal attenuation. For high-frequency applications above 100 MHz, a specialized high-frequency resistor should be used.
The ERJ14YJ2R0U has a maximum operating temperature of 125°C. While it can tolerate short-term excursions up to 150°C, prolonged exposure to high temperatures can affect its reliability and lifespan. If your application requires operation above 125°C, a high-temperature resistor should be used.
The ERJ14YJ2R0U has a power rating of 0.25W. To ensure it meets your application's power rating requirements, calculate the maximum power dissipation using the formula P = V^2/R, where V is the voltage across the resistor and R is the resistance value. Ensure the calculated power does not exceed 0.25W.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ERJ14YJ2R0U Overview
Use the download button to access the ERJ14YJ2R0U 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJ14,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
