Part Image

FM24CL64B-G - Infineon

Description: Cypress Semiconductor FM24CL64B-G Serial-2 Wire, Serial-I2C FRAM Memory, 64kbit, 2.7 → 3.65 V 8-Pin SOIC

Download FM24CL64B-G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
FM24CL64B-G - Infineon PCB footprint - Small Outline Packages - Small Outline Packages - 8-pin SOIC_
click to zoom
3D Models
FM24CL64B-G - Infineon  - 3D model - Small Outline Packages - 8-pin SOIC_
click to zoom

FM24CL64B-G Details

  • Manufacturer Part Number:

    FM24CL64B-G

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Taiwan, Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.71

  • Manufacturer:

    Infineon Technologies AG

  • YTEOL:

    8

  • Additional Feature:

    ALSO OPERATES WITH 0.4 MHZ AND 0.1 MHZ :2KV ESD AVAILABLE

  • Clock Frequency-Max (fCLK):

    1 MHz

  • Data Retention Time-Min:

    10

  • Endurance:

    100000000000000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.889 mm

  • Memory Density:

    65536 bit

  • Memory IC Type:

    FRAM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    8192 words

  • Number of Words Code:

    8000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    8KX8

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.727 mm

  • Serial Bus Type:

    I2C

  • Standby Current-Max:

    0.000006 A

  • Standby Voltage-Min:

    2.7 V

  • Supply Current-Max:

    0.0003 mA

  • Supply Voltage-Max (Vsup):

    3.65 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.8985 mm

  • Write Protection:

    HARDWARE

FM24CL64B-G Frequently Asked Questions (FAQs)

  • The maximum operating frequency of the FM24CL64B-G is 1 MHz.
  • No, the FM24CL64B-G is a 3.3V device and is not compatible with 5V logic. It requires a 3.3V power supply and I/O voltage.
  • The HOLD pin is used to pause the serial clock input (SCL) during a read or write operation. When the HOLD pin is driven low, the SCL input is ignored, and the device enters a 'hold' state. When the HOLD pin is driven high, the device resumes normal operation.
  • The WP (Write Protect) pin is used to prevent accidental writes to the device. When the WP pin is driven low, the device is in a write-protected state, and any write attempts will be ignored.
  • To ensure data integrity, it is recommended to use a checksum or CRC (Cyclic Redundancy Check) to verify the data written to the device. Additionally, it is recommended to use a robust communication protocol, such as I2C, to minimize errors during data transfer.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FM24CL64B-G Overview

Use the download button to access the FM24CL64B-G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FM24C, or try a keyword search, such as FRAMs

Parts related to FM24CL64B-G

Showing 0 results