Please enter a minimum 3 letters or numbers
Technical Content
Part Image

FM24V05-GTR - Infineon

Description: F-RAM 512K (64KX8) 3.3V F-RAM

Download FM24V05-GTR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
FM24V05-GTR - Infineon - PCB symbol
click to zoom
PCB Footprints
FM24V05-GTR - Infineon PCB footprint - Small Outline Packages - Small Outline Packages - 8-PIN SOIC (150 mils) 51-85066
click to zoom
3D Models
FM24V05-GTR - Infineon - 3D model - Small Outline Packages - 8-PIN SOIC (150 mils) 51-85066
click to zoom

FM24V05-GTR Details

  • Manufacturer Part Number:

    FM24V05-GTR

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOIC-8

  • Manufacturer:

    Infineon Technologies AG

  • YTEOL:

    8

  • Additional Feature:

    also operates with 1 MHZ ; 2.5KV ESD AVAILABLE

  • Clock Frequency-Max (fCLK):

    3.4 MHz

  • Data Retention Time-Min:

    10

  • Endurance:

    100000000000000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.889 mm

  • Memory Density:

    524288 bit

  • Memory IC Type:

    FRAM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    65536 words

  • Number of Words Code:

    64000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    64KX8

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.727 mm

  • Serial Bus Type:

    I2C

  • Standby Current-Max:

    0.00015 A

  • Standby Voltage-Min:

    2 V

  • Supply Current-Max:

    0.001 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    20

  • Width:

    3.8985 mm

  • Write Protection:

    HARDWARE

FM24V05-GTR Frequently Asked Questions (FAQs)

  • A good PCB layout for the FM24V05-GTR involves keeping the power and ground pins as close as possible to the device, using a solid ground plane, and minimizing the length of the clock signal traces. Additionally, it's recommended to use a decoupling capacitor between VCC and GND pins.
  • To ensure data integrity, it's recommended to use a voltage supervisor or a power-on reset circuit to ensure that the device is fully powered up before accessing the memory. Additionally, using a capacitor on the VCC pin can help to filter out power noise and prevent data corruption.
  • The maximum operating frequency of the FM24V05-GTR is 20 MHz. Operating the device at higher frequencies can increase power consumption, so it's recommended to use the lowest frequency necessary for the application to minimize power consumption.
  • The HOLD pin is used to pause the serial interface during a bus conflict or when the device is not ready to transmit data. When the HOLD pin is asserted, the device will tri-state its output and ignore incoming data. It's recommended to use an external pull-up resistor on the HOLD pin to ensure it's in a defined state when not in use.
  • The recommended method for initializing the FM24V05-GTR involves performing a power-on reset, followed by configuring the device's control registers, such as the configuration register (CR) and the status register (SR). The CR register sets the device's operating mode, while the SR register provides status information about the device.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FM24V05-GTR Overview

Use the download button to access the FM24V05-GTR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FM24V, or try a keyword search, such as FRAMs

Suggested Parts

If you searched for FM24V05-GTR, you might also be interested in these parts:
Part Number
ADUM3200ARZ
AQW214EHAX
DAC124S085CIMM
SN74HC165DBR
MC-306 32.7680K-E3:ROHS
MAX44248ASA+
MC-30632.7680K-E:ROHS
LAN8720A-CP
STM32F429BIT6

Parts related to FM24V05-GTR

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

FM24V05-GTR Alternates

Showing results

Image Part Number Model
Part Image FM24V05-G Cypress Semiconductor

FRAM, 64KX8, Serial, I2C, PDSO8