Description:The ISL59885 video sync separator extracts sync timing information from both standard and non-standard video inputs in the presence of Macrovision pulses. The ISL59885 provides horizontal, vertical, and composite sync outputs as well as SD/HDTV detection. An auto input frequency detect feature automatically adapts to a wide range of video standards (it does not need a different RSET resistor for different frequencies). The vertical sync pulse is output on the rising edge of the first vertical serration foll
A good PCB layout for the ISL59885ISZ-T13 should consider the following: keep the input and output traces short and away from each other, use a solid ground plane, and place decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure the device operates within the specified temperature range, provide adequate heat sinking, use a thermal pad or thermal interface material, and avoid exposing the device to extreme temperatures during storage or operation.
The recommended input capacitor value is 10uF to 22uF, and the type should be a low-ESR ceramic capacitor, such as X5R or X7R, to ensure stable operation and minimize noise.
To troubleshoot issues with the device's output voltage regulation, check the input voltage, output load, and feedback resistors. Ensure the input voltage is within the specified range, the output load is within the recommended range, and the feedback resistors are correctly selected and connected.
The maximum allowed output current for the ISL59885ISZ-T13 is 3A. Exceeding this current may cause the device to overheat or enter overcurrent protection mode.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL59885ISZ-T13 Overview
Use the download button to access the ISL59885ISZ-T13 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL59,
or try a keyword search, such as Signal Separator ICs
