Description:The ISL78100 is a high-power LED backlight driver with an integrated 36V FET designed to drive up to 8 high-power LEDs in series. The PWM converter runs from an internally generated 1MHz clock. With efficiencies over 90%, the regulator provides tight control of LED current and may be configured in either boost or buck topologies, allowing from 3 to 8 series diodes to be driven from wide input voltages. LED light level may be controlled either by: LED DC bias current set via the LEVEL pin, or External low f
The recommended PCB layout for optimal performance involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a separate power plane for the input voltage and to keep the output voltage traces away from the input voltage traces to minimize noise coupling.
To ensure stability and prevent oscillations, it's essential to follow the recommended component values and PCB layout guidelines. Additionally, the output capacitor should be selected based on the output voltage and current requirements, and the input capacitor should be selected based on the input voltage and current requirements. It's also recommended to add a small series resistor (e.g., 1-2 ohms) between the output capacitor and the output pin to dampen any oscillations.
The maximum ambient temperature range for the ISL78100ARZ is -40°C to +125°C. However, the device's performance and reliability may be affected at extreme temperatures, and it's recommended to operate the device within the recommended operating temperature range of -20°C to +85°C for optimal performance.
Yes, the ISL78100ARZ is suitable for high-reliability and automotive applications. It's AEC-Q100 qualified and meets the requirements for automotive applications. However, it's essential to follow the recommended design and layout guidelines, and to perform thorough testing and validation to ensure the device meets the specific requirements of the application.
The power dissipation of the ISL78100ARZ can be calculated using the formula: Pd = (Vin - Vout) x Iout. The junction temperature can be calculated using the formula: Tj = Ta + (Pd x Rθja), where Rθja is the junction-to-ambient thermal resistance. It's essential to ensure that the junction temperature remains within the recommended operating range to prevent overheating and ensure reliable operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL78100ARZ Overview
Use the download button to access the ISL78100ARZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL78,
or try a keyword search, such as Display Drivers
