Description:Terminal Voltage 0V to 13. 2V, 128 Taps I2C Interface The Intersil ISL95311 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by an I2C interface. The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The wiper of the potentiome
Renesas provides a recommended PCB layout guide in their application note AN1995, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure optimal performance.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended operating conditions, including derating the output current and voltage according to the temperature derating curve provided in the datasheet. Additionally, ensure proper thermal management, such as using a heat sink or thermal interface material, and follow the recommended PCB layout guidelines.
Renesas recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF for the input capacitor. This helps to filter out high-frequency noise and ensure stable operation. The exact value may vary depending on the specific application and input voltage ripple requirements.
To troubleshoot OCP issues, first verify that the input voltage and current are within the recommended operating range. Check for any short circuits or excessive load current that may be triggering the OCP. Also, ensure that the OCP threshold is set correctly and that the device is not overheating. If the issue persists, consult the datasheet and application notes for further guidance or contact Renesas support.
Renesas recommends using a low-ESR ceramic capacitor with a value of 10uF to 47uF for the output capacitor. This helps to filter out high-frequency noise and ensure stable operation. The exact value may vary depending on the specific application and output voltage ripple requirements.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL95311WIU10Z-TK Overview
Use the download button to access the ISL95311WIU10Z-TK schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL95,
or try a keyword search, such as Digital Potentiometers
Suggested Parts
If you searched for ISL95311WIU10Z-TK, you might also be interested in these parts:
