Littelfuse recommends a PCB layout with a large copper area connected to the thermal pad to dissipate heat efficiently. A minimum of 1 oz copper thickness is recommended, and the copper area should be at least 1 inch x 1 inch in size.
To ensure reliable soldering, Littelfuse recommends using a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. The component should be soldered within 3 seconds to 5 seconds, and the solder joints should be inspected for any defects.
The LCA110LSTR has a maximum surge current rating of 100 A, which is specified for a 10/1000 μs waveform. However, it's essential to note that the surge current rating may vary depending on the specific application and operating conditions.
The LCA110LSTR is rated for operation up to 150°C, but it's essential to derate the component's current rating at higher temperatures. Littelfuse provides a derating curve in the datasheet to help designers determine the maximum current rating at a given temperature.
To select the correct fuse, designers should consider factors such as the maximum available fault current, the normal operating current, and the required interrupting rating. Littelfuse provides a fuse selection guide that can help designers choose the appropriate fuse for their application.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LCA110LSTR Overview
Use the download button to access the LCA110LSTR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LCA11,
or try a keyword search, such as Solid State Relays
