ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR
Seated Height-Max:
1.8 mm
Surface Mount:
YES
Technology:
BIPOLAR
Terminal Finish:
TIN
Terminal Form:
GULL WING
Terminal Pitch:
1.27 mm
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
Width:
3.95 mm
LM317LMX Frequently Asked Questions (FAQs)
The maximum input voltage that can be applied to the LM317LMX is 40V. Exceeding this voltage can cause damage to the device.
To ensure stability and prevent oscillations, a minimum output capacitance of 1uF is recommended. Additionally, the input capacitor should be at least 10uF to prevent oscillations.
The minimum load current required for the LM317LMX to regulate properly is 3.5mA. If the load current is less than this, the output voltage may not be regulated accurately.
No, the LM317LMX is designed to regulate positive voltages only. It is not suitable for regulating negative voltages.
The output voltage of the LM317LMX can be adjusted by using a resistive divider network between the output and the adjust pin. The output voltage is determined by the ratio of the resistors in the divider network.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LM317LMX Overview
Use the download button to access the LM317LMX schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LM317,
or try a keyword search, such as Linear Regulator ICs
Suggested Parts
If you searched for LM317LMX, you might also be interested in these parts: