ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure reliable operation in high-humidity environments, ROHM recommends applying a conformal coating to the device, and following proper storage and handling procedures to prevent moisture absorption.
Although the datasheet doesn't specify a maximum voltage for the EN pin, ROHM recommends limiting the voltage to 6V to prevent damage to the internal circuitry.
Yes, the LTR18EZPJ123 is suitable for battery-powered devices due to its low quiescent current (IQ) and low dropout voltage (VDO). However, ensure that the input voltage is within the recommended range and that the device is properly bypassed to minimize power consumption.
To troubleshoot output voltage instability or oscillation issues, check the input voltage, output capacitor selection, and PCB layout for proper decoupling and grounding. Ensure that the device is properly bypassed and that the output capacitor is within the recommended range (10uF to 100uF).
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LTR18EZPJ123 Overview
Use the download button to access the LTR18EZPJ123 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LTR18,
or try a keyword search, such as Fixed Resistors
