Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX319CPA+ - Analog Devices

Description: Maxim MAX319CPA+, Analogue Switch Single SPDT, 8-Pin PDIP

Download MAX319CPA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX319CPA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX319CPA+ - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - P8+1_2022
click to zoom
3D Models
MAX319CPA+ - Analog Devices - 3D model - Dual-In-Line Packages - P8+1_2022
click to zoom

MAX319CPA+ Details

  • Manufacturer Part Number:

    MAX319CPA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-PDIP-300_MIL

  • Package Description:

    0.300 INCH, PLASTIC, DIP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-PDIP-300_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-05-25

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPDT

  • JESD-30 Code:

    R-PDIP-T8

  • JESD-609 Code:

    e3

  • Length:

    9.375 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Off-state Isolation-Nom:

    68 dB

  • On-state Resistance Match-Nom:

    2 Ω

  • On-state Resistance-Max (Ron):

    35 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP8,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    4.572 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.005 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    NO

  • Switch-off Time-Max:

    175 ns

  • Switch-on Time-Max:

    175 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7.62 mm

MAX319CPA+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX319CPA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the signal sources. Additionally, use short traces and avoid routing digital signals near analog signals. Refer to the application note AN-1071 for more detailed guidelines.
  • To properly terminate the differential inputs, use a 100Ω differential termination resistor (RT) between the positive and negative input pins. This resistor should be placed as close to the device as possible. Additionally, ensure that the input signals are properly matched to the 100Ω differential impedance.
  • The maximum cable length that can be used with the MAX319CPA+ depends on the signal frequency, cable type, and termination. As a general guideline, for frequencies up to 100 kHz, cable lengths up to 100 meters can be used. However, for higher frequencies or longer cable lengths, signal attenuation and distortion may occur. It's recommended to use a cable with a characteristic impedance of 100Ω and to follow proper termination and shielding techniques.
  • To configure the MAX319CPA+ for single-ended input operation, connect the negative input pin (IN-) to the analog ground (AGND) and use the positive input pin (IN+) as the single-ended input. Ensure that the input signal is referenced to the analog ground and that the input voltage range is within the specified limits.
  • The recommended power-up sequence for the MAX319CPA+ is to power up the analog supply (VCC) first, followed by the digital supply (VDD). This ensures that the analog circuitry is powered up before the digital circuitry, preventing latch-up or other issues.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX319CPA+ Overview

Use the download button to access the MAX319CPA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX31, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX319CPA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX319CPA+ Alternates

Showing results

Image Part Number Model
Part Image MAX319EPA+ Analog Devices Inc

SPDT, 1 Func, 1 Channel, CMOS, PDIP8
Part Image MAX319MJA Maxim Integrated Products

SPDT, 1 Func, 1 Channel, CMOS, CDIP8
Part Image MAX319EPA+ Maxim Integrated Products

SPDT, 1 Func, 1 Channel, CMOS, PDIP8
Part Image MAX319CPA Maxim Integrated Products

SPDT, 1 Func, 1 Channel, CMOS, PDIP8
Part Image MAX319CJA Maxim Integrated Products

SPDT, 1 Func, 1 Channel, CMOS, CDIP8
For a full list of alternate parts for MAX319CPA+, check out Findchips.com