Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3394EETA+T - Analog Devices

Description: Level Translator ESD Protected 15KV Maxim MAX3394EETA+T, Dual, Voltage Level Translator, 3-State, 1.65 → 5.5 V, 8-Pin TDFN

Download MAX3394EETA+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3394EETA+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3394EETA+T - Analog Devices PCB footprint - Small Outline No-lead - Small Outline No-lead - 8 TDFN T833+2
click to zoom
3D Models
MAX3394EETA+T - Analog Devices - 3D model - Small Outline No-lead - 8 TDFN T833+2
click to zoom

MAX3394EETA+T Details

  • Manufacturer Part Number:

    MAX3394EETA+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-LFCSP-3X3X0.75

  • Package Description:

    TDFN-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-LFCSP-3X3X0.75

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2005-11-14

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Input Characteristics:

    STANDARD

  • Interface IC Type:

    VOLTAGE LEVEL TRANSLATOR

  • JESD-30 Code:

    S-XDSO-N8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Bits:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC8,.12,25

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    1.65 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

MAX3394EETA+T Frequently Asked Questions (FAQs)

  • A good PCB layout practice for the MAX3394EETA+T is to keep the analog and digital grounds separate, use a solid ground plane, and keep the input and output traces short and away from each other. Additionally, use a common-mode filter or a ferrite bead on the input lines to reduce EMI.
  • To ensure proper power and decoupling, use a high-quality power supply with low noise and ripple. Add a 0.1uF ceramic capacitor between the VCC and GND pins, and a 10uF electrolytic capacitor between the VCC and GND pins for bulk decoupling. Place the capacitors close to the device to minimize inductance.
  • The maximum cable length that can be driven by the MAX3394EETA+T depends on the cable type, frequency, and signal amplitude. As a general rule, the MAX3394EETA+T can drive up to 100 meters of cable at 100Mbps. However, it's recommended to consult the cable manufacturer's specifications and perform signal integrity simulations to determine the maximum cable length for a specific application.
  • To troubleshoot common issues with the MAX3394EETA+T, first check the power supply and decoupling. Verify that the input signals are within the specified range and that the device is properly configured. Use an oscilloscope to check the input and output signals, and consult the datasheet and application notes for troubleshooting guides and FAQs.
  • Yes, the MAX3394EETA+T can be used in a hot-swap or hot-plug application. The device has built-in overcurrent protection and can withstand voltage transients during hot-swapping. However, it's recommended to add external protection circuitry, such as a TVS diode, to ensure the device is protected from voltage surges and spikes.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3394EETA+T Overview

Use the download button to access the MAX3394EETA+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX33, or try a keyword search, such as Level Translators

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for MAX3394EETA+T, you might also be interested in these parts:
Part Number
MAX31730ATC+T
MAX31850KATB+
MC7818ACTG
L6386E
L6386ED
434781025816
LTC3886EUKG-1#PBF
NANOSMDC200F-2
SG-3030LC32.7680KB3:PURESN

Parts related to MAX3394EETA+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑