3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for MM74HC132N
- Part Number MM74HC132N
- Manufacturer onsemi
- Pin Count 14
- Part Category Integrated Circuit
- Package Category Dual-In-Line Packages
- Pinout / Pin List Click Here (Member Only)
MM74HC132N Details
-
Manufacturer Part Number:
MM74HC132N
-
Brand Name:
ON Semiconductor
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Obsolete
-
Package Description:
DIP-14
-
Manufacturer Package Code:
N14A
-
HTS Code:
8542.39.00.60
-
Manufacturer:
onsemi
-
YTEOL:
0
-
Family:
HC/UH
-
JESD-30 Code:
R-PDIP-T14
-
Logic IC Type:
NAND GATE
MM74HC132N Frequently Asked Questions (FAQs)
-
The recommended operating voltage range for MM74HC132N is 2V to 6V, with a typical voltage of 5V.
-
When the input pins are not in use, it is recommended to tie them to VCC or GND through a resistor to prevent floating inputs and reduce power consumption.
-
The maximum frequency of operation for MM74HC132N is typically around 25 MHz, but it can vary depending on the specific application and operating conditions.
-
Yes, MM74HC132N can be used in a 3.3V system, but the output voltage will be limited to around 3.3V, and the device may not be able to drive as much current as it would at 5V.
-
To ensure that the output signals are not distorted or attenuated, it is recommended to use a pull-up or pull-down resistor on the output pins, and to keep the output traces as short as possible to minimize signal degradation.
Trust Checks
Trust Score Unavailable
MM74HC132N Overview
Use the download button to access the MM74HC132N 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
