The maximum frequency of operation for the MM74HCT08N is typically around 30-40 MHz, but this can vary depending on the specific application, supply voltage, and output load.
To ensure proper power and decoupling, connect the VCC pin to a stable 5V power supply, and decouple the power supply lines with 0.1uF ceramic capacitors as close to the device as possible. Additionally, use a 10uF electrolytic capacitor for bulk decoupling.
The input voltage threshold for the MM74HCT08N is typically around 2.0V for a logic high and 0.8V for a logic low, but this can vary slightly depending on the specific device and operating conditions.
While the MM74HCT08N is specified for 5V operation, it can be used with a 3.3V power supply, but the output voltage levels and noise margins may be reduced. Additionally, the device may not meet all of the specified timing and logic level parameters at 3.3V.
Unused inputs on the MM74HCT08N should be tied to a valid logic level (either VCC or GND) to prevent floating inputs and ensure proper device operation.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
MM74HCT08N Overview
Use the download button to access the MM74HCT08N schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MM74H,
or try a keyword search, such as Gates