Part Image

NCV8535MN330R2G - onsemi

Description: High Accuracy Over Line and Load (+/-0.9% at 25C); Ultra-Low Dropout Voltage at Full Load (260 mV typ.); No Minimum Output Current Required for Stability; Low Noise (31 uVrms w/10 nF Cnr and 51 uVrms w/out Cnr); Low Shutdown Current (0.07 uA); Reverse Bias Protected; 2.6 V to 12 V Supply Range; Thermal Shutdown Protection; Current Limitation; Requires Only 1.0 uF Output Capacitance for Stability; Stable with Any Type of Capacitor (including MLCC); Available in 1.5 V, 1.8 V, 1.9V, 2.5 V, 2.8 V, 2.85 V, 3.0 V

Download NCV8535MN330R2G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
NCV8535MN330R2G - onsemi  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

NCV8535MN330R2G Details

  • Manufacturer Part Number:

    NCV8535MN330R2G

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    DFN10, 3x3, 0.5P

  • Pin Count:

    10

  • Manufacturer Package Code:

    485C

  • Direct Group:

    VG0035181O74

  • Similar Group:

    VG001002123310051326

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    6 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    7.3

  • Adjustability:

    FIXED

  • Dropout Voltage1-Max:

    0.34 V

  • Dropout Voltage1-Nom:

    0.4 V

  • Input Voltage Absolute-Max:

    16 V

  • Input Voltage-Max:

    12 V

  • Input Voltage-Min:

    3.7 V

  • JESD-30 Code:

    S-PDSO-N10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    10

  • Operating Temperature TJ-Max:

    150 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Output Current1-Max:

    0.5 A

  • Output Voltage1-Max:

    3.35 V

  • Output Voltage1-Min:

    3.25 V

  • Output Voltage1-Nom:

    3.3 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC10,.11,20

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1 mm

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Voltage Tolerance-Max:

    1.5%

  • Width:

    3 mm

NCV8535MN330R2G Frequently Asked Questions (FAQs)

  • A good PCB layout for optimal thermal performance would be to have a solid ground plane on the bottom layer, and to use thermal vias to connect the exposed pad to the ground plane. This helps to dissipate heat efficiently.
  • To ensure proper biasing, make sure to follow the recommended voltage and current ratings specified in the datasheet. Also, ensure that the input and output capacitors are properly selected and placed close to the device to minimize parasitic inductance.
  • The critical components that affect the device's reliability and lifespan are the input and output capacitors, as well as the PCB layout and thermal management. Poor selection or placement of these components can lead to reduced lifespan or even device failure.
  • To troubleshoot issues with the device, start by checking the PCB layout and thermal management to ensure proper heat dissipation. Then, verify that the input and output capacitors are properly selected and placed. Finally, check the device's voltage and current ratings to ensure they are within the recommended specifications.
  • The recommended testing and validation procedures for the device include verifying the output voltage and current, checking for overheating, and performing stress tests such as temperature cycling and vibration testing to ensure the device meets the required specifications.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

NCV8535MN330R2G Overview

Use the download button to access the NCV8535MN330R2G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NCV85, or try a keyword search, such as Linear Regulator ICs

Parts related to NCV8535MN330R2G

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview