The recommended soldering temperature is 260°C (500°F) for 10 seconds, with a peak temperature of 240°C (464°F) for 5 seconds.
Handle the thermistor by the body, not the leads. Store them in a dry, cool place, away from direct sunlight and moisture. Avoid bending or flexing the leads excessively.
The maximum power rating is 50 mW, with a maximum current of 5 mA.
While the thermistor is designed to operate in a wide range of temperatures, high humidity may affect its accuracy and reliability. It's recommended to use a conformal coating or encapsulation to protect the device in humid environments.
Calibration involves comparing the thermistor's output to a known temperature reference. Use a calibrated thermometer and a data acquisition system to measure the thermistor's resistance at multiple temperatures, then create a lookup table or use a curve-fitting algorithm to generate a calibration curve.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NTCLE203E3104GB0 Overview
Use the download button to access the NTCLE203E3104GB0 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
