TTL COMPATIBLE MUX/DMUX SWITCH; MAX RON = 15 OHM @ VIN 2.4V & ION = 15MA
Family:
CBT/FST/QS/5C/B
JESD-30 Code:
R-PDSO-G16
JESD-609 Code:
e3
Length:
4.9 mm
Load Capacitance (CL):
50 pF
Logic IC Type:
BUS EXCHANGER
Moisture Sensitivity Level:
1
Number of Bits:
8
Number of Functions:
1
Number of Ports:
9
Number of Terminals:
16
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-40 °C
Output Characteristics:
3-STATE
Output Polarity:
TRUE
Package Body Material:
PLASTIC/EPOXY
Package Code:
SSOP
Package Equivalence Code:
SSOP16,.25
Package Shape:
RECTANGULAR
Package Style:
SMALL OUTLINE, SHRINK PITCH
Propagation Delay (tpd):
0.25 ns
Qualification Status:
Not Qualified
Seated Height-Max:
1.75 mm
Supply Voltage-Max (Vsup):
5.25 V
Supply Voltage-Min (Vsup):
4.75 V
Supply Voltage-Nom (Vsup):
5 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
INDUSTRIAL
Terminal Finish:
MATTE TIN
Terminal Form:
GULL WING
Terminal Pitch:
0.635 mm
Terminal Position:
DUAL
Width:
3.9 mm
PI5C3251QE Frequently Asked Questions (FAQs)
Diodes Incorporated recommends following a 4-layer PCB stackup with a solid ground plane, and using a differential pair routing for the clock signals. Additionally, it's recommended to keep the signal traces as short as possible and avoid vias under the device.
The PI5C3251QE requires a single 3.3V power supply, and it's recommended to use a low-dropout linear regulator (LDO) to power the device. The power sequencing requirement is to power up the VCC pin before the clock signal, and to ensure that the VCC pin is stable before applying the clock signal.
The PI5C3251QE can support clock frequencies up to 200MHz, but it's recommended to check the device's jitter performance and signal integrity at higher frequencies to ensure reliable operation.
The PI5C3251QE has a programmable clock divider that allows the output frequency to be divided by 1, 2, 4, or 8. The clock divider is controlled by the SEL0 and SEL1 pins, which can be tied high or low to select the desired output frequency.
The typical power consumption of the PI5C3251QE is around 20mA, but it can vary depending on the clock frequency, output load, and operating conditions. It's recommended to check the device's power consumption in the specific application to ensure proper power budgeting.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PI5C3251QE Overview
Use the download button to access the PI5C3251QE schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PI5C3,
or try a keyword search, such as Bus Driver/Transceivers
