Bourns provides a recommended PCB layout and land pattern in their application notes and design guides. It's essential to follow these guidelines to ensure optimal performance, low thermal resistance, and minimal electromagnetic interference (EMI).
To minimize electromagnetic interference (EMI), keep the inductor at least 5 mm away from sensitive components, such as oscillators, antennas, or other inductors. You can also use shielding techniques, like copper tape or mu-metal, to contain the magnetic field.
Bourns recommends derating the voltage by 10-15% to ensure reliable operation. For the PWR163S-25-R100FE, the maximum allowable voltage is 25V, so the derated voltage would be around 22.5V to 23.75V.
The SRF can be calculated using the inductor's inductance, capacitance, and resistance values. For the PWR163S-25-R100FE, the SRF is approximately 150 MHz. To minimize the impact of SRF, ensure your operating frequency is below the SRF, and consider using a shield or a series resistor to dampen resonant peaks.
The thermal resistance of the PWR163S-25-R100FE is approximately 30°C/W. This means that for every watt of power dissipated, the inductor's temperature will rise by 30°C. Ensure your design takes into account the inductor's thermal resistance to prevent overheating and premature failure.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PWR163S-25-R100FE Overview
Use the download button to access the PWR163S-25-R100FE schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like PWR16,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
