ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends following the derating curves in the datasheet for operation above 85°C. Additionally, ensure good thermal design, and consider using a heat sink or thermal interface material to reduce junction temperature.
Although the datasheet specifies a maximum input voltage of 5.5V, ROHM recommends limiting the input voltage to 5V to ensure reliable operation and prevent damage to the internal ESD protection diodes.
Yes, the QH8KC5TCR is suitable for high-frequency switching applications up to 100 kHz. However, ensure that the PCB layout is optimized for high-frequency operation, and consider using a gate driver with a low output impedance to minimize switching losses.
ROHM recommends a slow power-up sequence (typically 1-10 ms) to prevent latch-up or damage. Ensure that the input voltage is stable before applying the clock signal, and avoid applying the clock signal before the input voltage is stable.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
QH8KC5TCR Overview
Use the download button to access the QH8KC5TCR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like QH8KC,
or try a keyword search, such as Power Field-Effect Transistors
Suggested Parts
If you searched for QH8KC5TCR, you might also be interested in these parts:
