ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane to reduce thermal resistance.
To ensure reliable operation in high-temperature environments, it's essential to follow proper thermal design and layout guidelines. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends derating the device's power consumption and voltage rating according to the operating temperature.
Although the datasheet specifies the recommended operating voltage range, it's essential to note that the maximum allowed voltage on the input pins is typically 5.5V, regardless of the operating voltage. Exceeding this voltage may cause damage to the device.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input lines to protect the SLR-56MCT32 from electrostatic discharge. Additionally, follow proper handling and storage procedures to prevent ESD damage.
ROHM recommends powering up the SLR-56MCT32 in the following sequence: VCC, then VREF, and finally the input signals. This sequence helps prevent latch-up and ensures proper device operation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SLR-56MCT32 Overview
Use the download button to access the SLR-56MCT32 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SLR-5,
or try a keyword search, such as Visible LEDs
