The recommended land pattern for SMCJ75CA is a rectangular pad with a size of 2.5mm x 1.5mm, with a solder mask clearance of 0.2mm. The pad should be centered on the component and have a thermal relief connection to the ground plane.
To handle the ESD sensitivity of SMCJ75CA, it is recommended to use an ESD protection device, such as a TVS diode, in parallel with the SMCJ75CA. Additionally, ensure that the PCB design follows good ESD protection practices, such as using a ground plane and minimizing signal trace lengths.
The maximum operating temperature range for SMCJ75CA is -40°C to 150°C. However, it is recommended to derate the device's power rating at high temperatures to ensure reliable operation.
SMCJ75CA is designed for low-frequency applications up to 1MHz. For high-frequency applications, it is recommended to use a different device that is specifically designed for high-frequency operation, such as a Schottky diode or a high-frequency TVS diode.
To ensure the reliability of SMCJ75CA in a humid environment, it is recommended to use a conformal coating or potting compound to protect the device from moisture. Additionally, ensure that the PCB design follows good moisture protection practices, such as using a moisture-resistant PCB material and minimizing the use of vias and through-holes.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SMCJ75CA Overview
Use the download button to access the SMCJ75CA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SMCJ7,
or try a keyword search, such as Transient Suppressors
Suggested Parts
If you searched for SMCJ75CA, you might also be interested in these parts:
