TCST2300 footprint, schematic symbol and 3D model by Vishay

Symbol

PCB Footprints

3D Models

TCST2300 Details

The recommended PCB layout for the TCST2300 involves placing the device near the input signal source, using a ground plane to minimize noise, and keeping the input and output traces as short as possible.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the GND pin to a solid ground plane. The input signal should be AC-coupled to the VIN pin, and the output should be taken from the VOUT pin.
The TCST2300 can handle input signal amplitudes up to 5Vpp, but it's recommended to keep the input signal amplitude below 3Vpp to ensure optimal performance and minimize distortion.
Yes, the TCST2300 can be used in a differential input configuration by connecting the VIN+ and VIN- pins to the differential input signal, and the VOUT pin will output a single-ended signal.
To filter out noise and ripple in the output signal, add a low-pass filter (e.g., an RC filter) between the VOUT pin and the load, with a cutoff frequency set to the desired bandwidth.

Community Provided

System Verified

Community Approved

Use the download button to access the TCST2300 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like TCST2, or try a keyword search, such as Slotted Switch

If you searched for TCST2300, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	TCST2300 Telefunken Microelectronics Gmbh Optoelectronic Device
For a full list of alternate parts for TCST2300, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →