Description:The X9317 is a digitally controlled potentiometer (XDCP™). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The positio
Renesas provides a recommended PCB layout guide in their application note (AN1469) for the X9317 series, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
The X9317US8IZ-2.7T1 has an internal POR and BOR circuitry. To handle these, ensure that the power supply ramps up slowly (typically 10ms to 100ms) and that the voltage stays within the recommended operating range. Additionally, use an external capacitor (e.g., 10nF to 100nF) between the VCC and GND pins to filter out noise and ensure a clean reset.
Although the datasheet specifies an operating temperature range of -40°C to 85°C, Renesas recommends derating the device's performance at extreme temperatures. For reliable operation, it's recommended to operate the device within the -20°C to 70°C range, unless specific testing and validation are performed for the target application.
The X9317US8IZ-2.7T1 has a built-in WDT that can be enabled and configured through the device's control registers. Refer to the datasheet and application notes for specific details on WDT configuration, timeout periods, and reset behavior.
Renesas has implemented ESD protection diodes on the I/O pins, and the device is designed to prevent latch-up. However, it's still essential to follow proper ESD handling and PCB design guidelines to prevent damage during manufacturing, testing, and operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
X9317US8IZ-2.7T1 Overview
Use the download button to access the X9317US8IZ-2.7T1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like X9317,
or try a keyword search, such as Digital Potentiometers
