Description:The Intersil X9318 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The
The recommended power-up sequence is to apply VCC first, followed by VLOGIC, and then the serial clock (SCL) and serial data (SDA) lines. This ensures proper initialization of the device.
To ensure reliable communication, use a pull-up resistor on the SCL and SDA lines, and make sure the I2C bus is properly terminated. Also, ensure that the clock frequency does not exceed 400 kHz, and that the bus is not stretched during data transfer.
The maximum operating frequency of the X9318WS8IZ is 50 MHz, which is the maximum clock frequency of the internal oscillator. However, the I2C bus frequency should not exceed 400 kHz.
The X9318WS8IZ has a built-in brown-out detection circuit that resets the device when the supply voltage falls below a certain threshold. To handle brown-out detection and reset, ensure that the power supply is stable and within the recommended operating range. If a brown-out event occurs, the device will automatically reset and recover when the power supply returns to a stable state.
For optimal performance, follow good layout and routing practices, such as keeping the analog and digital signal paths separate, using a solid ground plane, and minimizing noise coupling. Also, ensure that the device is placed close to the power supply and that the power supply lines are properly decoupled.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
X9318WS8IZ Overview
Use the download button to access the X9318WS8IZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like X9318,
or try a keyword search, such as Digital Potentiometers
