Part Image

X9C503SZT1 - Renesas Electronics

Description: The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by

Download X9C503SZT1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
X9C503SZT1 - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - M8. 15E
click to zoom
3D Models
X9C503SZT1 - Renesas Electronics  - 3D model - Small Outline Packages - M8. 15E
click to zoom

X9C503SZT1 Details

  • Manufacturer Part Number:

    X9C503SZT1

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOICN

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    M8.15E

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    5

  • Control Interface:

    INCREMENT/DECREMENT

  • Converter Type:

    DIGITAL POTENTIOMETER

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9022 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Positions:

    100

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Resistance Law:

    LINEAR

  • Resistance Tolerance-Max:

    20%

  • Resistor Terminal Voltage-Max:

    5 V

  • Resistor Terminal Voltage-Min:

    -5 V

  • Seated Height-Max:

    1.7272 mm

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Coefficient-Nom:

    300 ppm/°C

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Total Resistance-Nom:

    50000 Ω

  • Width:

    3.9116 mm

X9C503SZT1 Frequently Asked Questions (FAQs)

  • The recommended operating voltage range for the X9C503SZT1 is 2.7V to 5.5V, although it can operate from 2.3V to 6.0V with reduced performance.
  • To properly initialize the X9C503SZT1, apply a valid logic high signal to the Chip Select (CS) pin, then send a 16-bit initialization command (0x0000) to the device. This sets the device to its default state.
  • The maximum clock frequency for the X9C503SZT1 is 1 MHz, although it can operate at lower frequencies with reduced power consumption.
  • The X9C503SZT1 has an internal POR and PDR circuit. During power-up, the device resets and initializes itself. During power-down, the device enters a low-power state. Ensure that your design accommodates these reset conditions to prevent unexpected behavior.
  • The WP pin is used to prevent accidental writes to the device. When WP is tied to VCC, the device is in write-protect mode, and any write attempts will be ignored. When WP is tied to GND, the device is in normal operation mode.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

X9C503SZT1 Overview

Use the download button to access the X9C503SZT1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like X9C50, or try a keyword search, such as Digital Potentiometers

Parts related to X9C503SZT1

Showing 0 results