Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ZSC31050FIG1-T - Renesas Electronics

Description: The ZSC31050 is a CMOS integrated circuit for amplification and sensor-specific correction of bridge sensor signals. The device provides digital compensation of sensor offset, sensitivity, temperature drift and non-linearity by a 16-bit RISC microcontroller running a correction algorithm. The ZSC31050 accommodates virtually any resistive bridge sensor (e.g., piezo-resistive and steel-membrane-based pressure sensors). In addition, the device can interface to a separate temperature sensor. The bi-directional

Download ZSC31050FIG1-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ZSC31050FIG1-T - Renesas Electronics - PCB symbol
click to zoom
PCB Footprints
ZSC31050FIG1-T - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - PYG-16 PACAKAGE OUTLINE 5.3mm SSOP
click to zoom
3D Models
ZSC31050FIG1-T - Renesas Electronics - 3D model - Small Outline Packages - PYG-16 PACAKAGE OUTLINE 5.3mm SSOP
click to zoom

ZSC31050FIG1-T Details

  • Manufacturer Part Number:

    ZSC31050FIG1-T

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SSOP

  • Package Description:

    SSOP-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    PYG16

  • Country Of Origin:

    Philippines

  • HTS Code:

    8542.31.00.01

  • Factory Lead Time:

    24 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • Interface IC Type:

    DIFFERENTIAL SENSOR SIGNAL CONDITIONER

  • JESD-30 Code:

    R-PDSO-G16

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -25 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SSOP

  • Package Equivalence Code:

    SSOP16(UNSPEC)

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Screening Level:

    AEC-Q100

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    2.7 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Width:

    5.3 mm

ZSC31050FIG1-T Frequently Asked Questions (FAQs)

  • A good PCB layout for the ZSC31050FIG1-T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the analog input traces. Additionally, it's recommended to place the device close to the analog signal sources and to use a low-ESR capacitor for power supply decoupling.
  • The ZSC31050FIG1-T requires a one-time calibration process to ensure optimal accuracy. This involves applying a known input voltage and adjusting the internal calibration registers to achieve the desired accuracy. The calibration process can be performed using the device's built-in calibration mode or through external calibration using a microcontroller or other external device.
  • The ZSC31050FIG1-T is rated for operation over a temperature range of -40°C to 125°C. However, the device's accuracy and performance may degrade at extreme temperatures. It's recommended to operate the device within a temperature range of 0°C to 85°C for optimal performance.
  • Yes, the ZSC31050FIG1-T can be used in a multi-channel configuration. The device has a built-in multiplexer that allows it to measure multiple analog input channels. The number of channels supported depends on the specific device configuration and the application requirements.
  • The power consumption of the ZSC31050FIG1-T depends on the operating mode and the clock frequency. In normal operating mode, the device consumes around 1.5mA of current. In low-power mode, the current consumption can be reduced to around 10uA. The device also has a shutdown mode that reduces the current consumption to less than 1uA.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ZSC31050FIG1-T Overview

Use the download button to access the ZSC31050FIG1-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ZSC31, or try a keyword search, such as Analog to Digital Converters

Suggested Parts

If you searched for ZSC31050FIG1-T, you might also be interested in these parts:
Part Number
ZSC31050FAG1-R
ZSC31050FEG1-R
IRFP250N
IRFP250PBF
A1N4148WS-HF
15151002601000
15211002601000
15221002601000
09663527613

Parts related to ZSC31050FIG1-T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑