Littelfuse recommends a PCB layout with a solid ground plane, minimal lead lengths, and a heat sink for high-power applications. A 4-layer PCB with a dedicated power plane and a separate ground plane is also recommended.
Proper cooling can be achieved by providing adequate airflow, using a heat sink with a thermal interface material, and ensuring the device is mounted on a thermally conductive surface. The datasheet provides thermal resistance values to help with thermal design.
The 0216.630MXEP has a surge current rating of 150A for 8.3ms, as per the IEC 61000-4-5 standard. However, it's essential to consult the datasheet and application notes for specific surge current requirements and design considerations.
While the 0216.630MXEP is primarily designed for low-frequency applications, it can be used in high-frequency applications up to 100kHz. However, the device's performance and characteristics may vary at higher frequencies, and additional design considerations may be necessary.
Littelfuse recommends using their proprietary fuse holders or clips, which are specifically designed for the 0216.630MXEP. These holders and clips ensure proper device seating, electrical connection, and thermal management.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
0216.630MXEP Overview
Use the download button to access the 0216.630MXEP schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like 0216.,
or try a keyword search, such as Electric Fuses
