Coilcraft provides a recommended land pattern for the 1008CS series, which can be found in the 'Packaging Information' section of the datasheet or on the Coilcraft website. The recommended land pattern ensures proper soldering and minimizes the risk of damage during assembly.
To prevent damage, handle the inductor by the body, avoiding touching the leads or the core. Use a vacuum pickup or tweezers to handle the component, and ensure the PCB is clean and dry before assembly. Avoid bending or flexing the leads, and use a soldering iron with a temperature-controlled tip to prevent overheating.
The maximum allowable voltage for the 1008CS-120XGRC inductor is not explicitly stated in the datasheet. However, as a general guideline, Coilcraft recommends that the voltage across the inductor should not exceed 1.5 times the rated current multiplied by the inductor's DC resistance (DCR). For the 1008CS-120XGRC, this would be approximately 12.6 V (1.5 x 120 mA x 0.087 Ω).
The 1008CS-120XGRC inductor is rated for operation up to 125°C. However, derating may be necessary for high-temperature applications. Coilcraft recommends consulting their application notes and temperature derating charts to ensure the inductor can operate safely and reliably in the specific application.
The equivalent series resistance (ESR) of the 1008CS-120XGRC inductor is not explicitly stated in the datasheet. However, Coilcraft provides an impedance vs. frequency graph in the datasheet, which can be used to estimate the ESR. Alternatively, you can contact Coilcraft's technical support for more information or request a custom ESR measurement.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
1008CS-120XGRC Overview
Use the download button to access the 1008CS-120XGRC schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 1008C,
or try a keyword search, such as Fixed Inductors
About COILCRAFT
Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.
