104JT-050 - Semitec

104JT-050 Frequently Asked Questions (FAQs)

• What is the recommended wire size and insulation for connecting the 104JT-050?
  The recommended wire size is 30 AWG to 24 AWG, and the insulation should be rated for at least 150°C to ensure reliable operation.
• How do I ensure accurate temperature measurement with the 104JT-050?
  To ensure accurate temperature measurement, the thermistor should be installed in a location that is representative of the temperature being measured, and the leads should be kept as short as possible to minimize thermal gradients and electrical noise.
• Can the 104JT-050 be used in high-humidity or wet environments?
  The 104JT-050 is not designed for use in high-humidity or wet environments. It is recommended to use a thermistor with a higher level of environmental protection, such as a hermetically sealed or waterproof thermistor, for applications in humid or wet environments.
• What is the self-heating effect of the 104JT-050, and how does it affect accuracy?
  The self-heating effect of the 104JT-050 is typically around 0.1°C to 0.5°C, depending on the operating current and ambient temperature. This effect can be minimized by using a low operating current and ensuring good thermal contact between the thermistor and the measured object.
• Can the 104JT-050 be used for high-temperature applications above 150°C?
  The 104JT-050 is not designed for use above 150°C. For high-temperature applications, a thermistor with a higher temperature rating, such as the 104JT-100, should be used.