ESR IS MEASURED AT 100 KHZ, RIPPLE CURRENT IS MEASURED AT 100KHZ, 45CEL
Capacitance:
150 µF
Capacitor Type:
TANTALUM CAPACITOR
Dielectric Material:
TANTALUM (SOLID POLYMER)
ESR:
55 mΩ
Height:
2.8 mm
Leakage Current:
0.15 mA
Length:
7.3 mm
Mounting Feature:
SURFACE MOUNT
Negative Tolerance:
20%
Number of Terminals:
2
Operating Temperature-Max:
105 °C
Operating Temperature-Min:
-55 °C
Package Style:
SMT
Packing Method:
TR, EMBOSSED, 13 INCH
Polarity:
POLARIZED
Positive Tolerance:
20%
Rated (DC) Voltage (URdc):
10 V
Ripple Current:
1700 mA
Size Code:
2917
Surface Mount:
YES
Tan Delta:
0.1
Terminal Shape:
J BEND
Width:
4.3 mm
10TPB150MGL Frequently Asked Questions (FAQs)
The recommended land pattern for the 10TPB150MGL is a rectangular pad with a size of 2.5mm x 1.5mm, with a solder mask opening of 2.2mm x 1.2mm. It's essential to follow the recommended land pattern to ensure reliable soldering and to prevent thermal issues.
To handle thermal management, ensure good thermal conductivity between the device and the PCB by using a thermal pad or a thermal interface material. Also, provide adequate airflow around the device, and consider using a heat sink if the application requires high power dissipation.
Although the datasheet specifies a maximum voltage rating of 150V, it's essential to derate the voltage based on the operating temperature and other environmental factors. As a general rule, it's recommended to operate the device at 80% of the maximum voltage rating to ensure reliability and prevent premature failure.
The 10TPB150MGL is designed for low-frequency applications, and its performance may degrade at high frequencies. If you need to use it in a high-frequency application, ensure that you carefully evaluate the device's performance and consider using a device specifically designed for high-frequency applications.
To prevent EOS, ensure that the device is operated within the specified voltage and current ratings. Also, use proper PCB design and layout techniques, such as using guard rings and providing adequate spacing between components, to prevent electrical overstress.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
10TPB150MGL Overview
Use the download button to access the 10TPB150MGL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 10TPB,
or try a keyword search, such as Ceramic Capacitors
Suggested Parts
If you searched for 10TPB150MGL, you might also be interested in these parts:
