ESR IS MEASURED AT 100 KHZ, RIPPLE CURRENT IS MEASURED AT 100KHZ, 45CEL
Capacitance:
330 µF
Capacitor Type:
TANTALUM CAPACITOR
Dielectric Material:
TANTALUM (SOLID POLYMER)
ESR:
40 mΩ
Height:
3.8 mm
Leakage Current:
0.33 mA
Length:
7.3 mm
Mounting Feature:
SURFACE MOUNT
Negative Tolerance:
20%
Number of Terminals:
2
Operating Temperature-Max:
105 °C
Operating Temperature-Min:
-55 °C
Package Style:
SMT
Packing Method:
TR, EMBOSSED, 13 INCH
Polarity:
POLARIZED
Positive Tolerance:
20%
Rated (DC) Voltage (URdc):
10 V
Ripple Current:
2800 mA
Size Code:
2917
Surface Mount:
YES
Tan Delta:
0.1
Terminal Shape:
J BEND
Width:
4.3 mm
10TPB330MW Frequently Asked Questions (FAQs)
Panasonic recommends a PCB layout with a thermal pad connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a heat sink or a metal plate for further heat dissipation.
To ensure reliable soldering, Panasonic recommends using a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. The component should be soldered within 3 seconds, and the soldering iron should be applied to the terminal for no more than 1 second.
Panasonic recommends derating the maximum voltage by 10% to 20% to ensure reliable operation and to prevent electrical overstress. This means that if the maximum rated voltage is 330V, the derated voltage should be around 264V to 286V.
Panasonic recommends storing the 10TPB330MW in a dry, cool place away from direct sunlight and moisture. The components should be stored in their original packaging or in a similar anti-static package to prevent electrostatic discharge damage. During shipping, the components should be protected from mechanical stress and vibration.
Panasonic recommends a reflow soldering profile with a peak temperature of 245°C to 250°C, and a dwell time above 217°C of 20 to 30 seconds. The temperature should rise at a rate of 1°C to 3°C per second, and the cooling rate should be 1°C to 3°C per second.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
10TPB330MW Overview
Use the download button to access the 10TPB330MW schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 10TPB,
or try a keyword search, such as Ceramic Capacitors
