1226AS-H-100M=P2 - Murata Electronics

1226AS-H-100M=P2 Frequently Asked Questions (FAQs)

• What is the recommended land pattern for this inductor?
  The recommended land pattern for the 1226AS-H-100M=P2 inductor is a rectangular pad with a size of 3.2mm x 2.5mm, with a non-solder mask defined (NSMD) pad shape to ensure proper soldering and to prevent solder bridging.
• How do I handle the inductor's thermal considerations?
  The 1226AS-H-100M=P2 inductor has a maximum operating temperature of 125°C. Ensure proper thermal management by providing adequate airflow, using thermal vias, and keeping the component away from heat sources. Follow the recommended PCB layout and thermal design guidelines to minimize thermal resistance.
• What is the inductor's self-resonant frequency (SRF)?
  The self-resonant frequency (SRF) of the 1226AS-H-100M=P2 inductor is approximately 150 MHz. This is the frequency at which the inductor's impedance peaks, and it's essential to consider this when designing filters or impedance-matching circuits.
• Can I use this inductor in a high-reliability or aerospace application?
  While the 1226AS-H-100M=P2 inductor is a high-quality component, it may not meet the specific requirements for high-reliability or aerospace applications. Consult with Murata's application engineers or refer to their documentation for more information on the component's suitability for such applications.
• How do I ensure the inductor's reliability and prevent failure?
  To ensure the reliability of the 1226AS-H-100M=P2 inductor, follow proper PCB design and assembly guidelines, avoid overheating, and keep the component away from moisture and contamination. Also, ensure that the inductor is operated within its specified ratings and derating guidelines.