Part Image

14285R-100 - Renesas Electronics

Description: The FT Router 5000 device is used to build high-performance LON routers, enabling multi-channel Free Topology (FT) networks with thousands of nodes in a single installation. The FT Router 5000 combines a Router 5000 core with an FT Smart Transceiver and can be used to build an FT-10 channel half-router with LON communication channel to route LON messages. The FT Router 5000 device includes embedded firmware that implements a half-router and is capable of supporting thousands of nodes using use one of four r

Download 14285R-100 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
14285R-100 - Renesas Electronics PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 14285R-100  49pin
click to zoom
3D Models
14285R-100 - Renesas Electronics  - 3D model - Quad Flat No-Lead - 14285R-100  49pin
click to zoom

14285R-100 Details

  • Manufacturer Part Number:

    14285R-100

  • Brand Name:

    Renesas

  • Part Life Cycle Code:

    Obsolete

  • Factory Lead Time:

    111 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Telecom IC Type:

    SUPPORT CIRCUIT

14285R-100 Frequently Asked Questions (FAQs)

  • Renesas provides a recommended PCB layout guide in their application note (R01AN3804EJ0100) which includes thermal design considerations, such as thermal vias, copper pours, and component placement.
  • Renesas recommends following their thermal design guidelines, using a heat sink if necessary, and ensuring proper airflow around the device. Additionally, the device's thermal protection feature can be enabled to prevent overheating.
  • Renesas recommends using a low-ESR capacitor (e.g., ceramic or film capacitor) for CIN and COUT, with values between 1uF to 10uF. The capacitor selection should be based on the specific application's requirements and noise tolerance.
  • Check the PG signal's voltage level, ensure proper connection to the output voltage, and verify that the output voltage is within the specified range. Also, review the device's fault detection and protection features, such as overvoltage protection and undervoltage lockout.
  • Renesas recommends a soft-start sequence, where the input voltage is gradually increased to the nominal value, and the enable pin is asserted after the input voltage has reached a stable level.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

14285R-100 Overview

Use the download button to access the 14285R-100 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 14285, or try a keyword search

Parts related to 14285R-100

Showing 0 results