The recommended PCB layout for the 1D10A-100M involves keeping the input and output traces as short as possible, using a solid ground plane, and placing a 10uF capacitor between the input and ground pins to reduce noise and ripple.
To ensure reliable operation in high-temperature environments, it's essential to provide adequate heat sinking, keep the device within its specified operating temperature range, and consider derating the output current according to the temperature derating curve provided in the datasheet.
The maximum allowable input voltage ripple for the 1D10A-100M is 10% of the nominal input voltage, but it's recommended to keep the ripple below 5% to ensure stable operation and minimize output voltage noise.
Yes, the 1D10A-100M can be used in a parallel configuration to increase output current, but it's crucial to ensure that the input and output connections are properly synchronized, and the output currents are balanced to prevent uneven current sharing.
The typical start-up time for the 1D10A-100M is around 10-15ms, but this can vary depending on the input voltage, output load, and other factors. It's essential to consider this start-up time when designing the power-up sequence for your system.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
1D10A-100M Overview
Use the download button to access the 1D10A-100M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 1D10A,
or try a keyword search, such as Fixed Inductors
