The recommended mounting pad layout for the 1N5350B is a rectangular pad with a minimum size of 2.5 mm x 1.5 mm, with a 0.5 mm radius corner to prevent thermal stress. The pad should be centered on the cathode (negative leg) of the diode.
To ensure reliable soldering of the 1N5350B, use a soldering iron with a temperature of 250°C to 270°C, and apply a small amount of solder to the pad. Avoid applying excessive heat or pressure, which can damage the diode. Use a solder with a melting point of 180°C to 220°C.
The maximum allowable voltage transient for the 1N5350B is 10 times the rated voltage (500 V) for a duration of 100 μs. Exceeding this limit can cause damage to the diode.
Yes, the 1N5350B can be used in a switching power supply, but it's essential to ensure that the diode is properly snubbed to prevent voltage spikes and ringing. A snubber circuit can be used to reduce the voltage transient and prevent damage to the diode.
The 1N5350B is designed for high-frequency switching applications, but its performance may degrade at frequencies above 100 kHz. The diode's reverse recovery time (trr) increases with frequency, which can lead to increased power losses and reduced efficiency.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
1N5350B Overview
Use the download button to access the 1N5350B schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 1N535,
or try a keyword search, such as Zener Diodes
