The recommended footprint and land pattern for the 1N5819T-G can be found in the IPC-7351 standard or in the manufacturer's application notes. A typical footprint for an SOD-123 package is a rectangular pad with a size of 1.5mm x 2.5mm, with a thermal pad of 1.2mm x 1.2mm.
To ensure proper soldering, follow the recommended soldering profile and temperature guidelines. Use a solder with a melting point below 250°C, and avoid applying excessive heat or force during soldering. Inspect the solder joints for defects such as cold joints, solder bridges, or insufficient solder.
The maximum allowable voltage derating for the 1N5819T-G is typically 80% of the maximum rated voltage, which is 40V for this device. This means the maximum allowable voltage is 32V. However, it's recommended to consult the manufacturer's application notes or contact their technical support for specific guidance.
The 1N5819T-G is a standard recovery diode, not optimized for high-frequency switching applications. It may not be suitable for frequencies above 100 kHz due to its relatively high reverse recovery time (trr) of 3.5μs. For high-frequency applications, consider using a fast recovery diode or a Schottky diode with a shorter trr.
To prevent electrostatic discharge (ESD) damage, handle the 1N5819T-G with ESD-protective equipment, such as wrist straps, mats, or bags. Ensure the workspace is ESD-safe, and avoid touching the device's pins or leads. If you need to store the devices, use ESD-protective packaging or bags.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
1N5819T-G Overview
Use the download button to access the 1N5819T-G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 1N581,
or try a keyword search, such as Rectifier Diodes
