The recommended operating temperature range for the 1SS393,LF is -40°C to 125°C, although the datasheet only specifies the storage temperature range.
Toshiba recommends following the JEDEC J-STD-020 standard for reflow soldering, and the device should be handled with care to avoid mechanical stress, bending, or twisting.
The maximum allowable voltage for the 1SS393,LF is 1.5 times the rated voltage (30V) for a short duration (less than 100ms), but it's recommended to operate within the rated voltage range for reliable performance.
While the 1SS393,LF is not specifically designed for high-frequency applications, it can be used up to 100 kHz with proper PCB layout and decoupling. However, it's essential to evaluate the device's performance and stability in your specific application.
The 1SS393,LF requires a stable bias voltage (Vcc) and a proper bypass capacitor (typically 0.1uF to 1uF) to ensure stable operation. The bias voltage should be within the recommended range, and the bypass capacitor should be placed close to the device.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
1SS393,LF Overview
Use the download button to access the 1SS393,LF schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like 1SS39,
or try a keyword search, such as Rectifier Diodes
