CTS Corporation recommends a 4-layer PCB with a solid ground plane, and to keep the input and output traces as short as possible to minimize noise and radiation. Additionally, it's recommended to use a common mode choke or ferrite bead to filter out high-frequency noise.
To ensure proper biasing, it's essential to follow the recommended biasing circuit in the datasheet. The 220ADA10 requires a dual supply voltage of ±12V to ±15V, and the bias voltage should be set to around 1/2 of the supply voltage. Additionally, the bias current should be limited to 10mA to prevent overheating.
The 220ADA10 is rated for operation from -40°C to +85°C. However, it's recommended to derate the device's performance at higher temperatures to ensure reliability and prevent thermal runaway.
While the 220ADA10 can be used in switching power supply applications, it's not recommended due to its relatively low bandwidth and high output impedance. The device is better suited for linear power supply applications or as a post-regulator in a switching power supply.
To troubleshoot common issues with the 220ADA10, start by checking the PCB layout and ensuring that the input and output traces are properly routed. Verify that the biasing circuit is correct and that the device is properly decoupled. If oscillation or instability persists, try adding a small capacitor (e.g., 10nF) between the output and ground to improve stability.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
220ADA10 Overview
Use the download button to access the 220ADA10 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 220AD,
or try a keyword search, such as Rotary Switches
