235-452/331-000 - Wago

235-452/331-000 Frequently Asked Questions (FAQs)

• What is the recommended torque for screwing the connector onto a PCB?
  The recommended torque is 0.5 Nm to 1.5 Nm, depending on the specific application and PCB material. It's essential to consult the WAGO application notes for specific guidance.
• Can I use this connector in high-vibration environments?
  Yes, the 235-452/331-000 connector is designed to withstand vibrations up to 10g according to IEC 60068-2-6. However, it's crucial to ensure proper mounting and screwing to maintain the connector's integrity.
• Is the connector suitable for use in humid or wet environments?
  The connector has a IP20 rating, which means it's protected against solid objects larger than 12.5 mm, but not against water or moisture. For humid or wet environments, consider using a connector with a higher IP rating or applying additional protection measures.
• Can I use this connector with wire sizes other than the recommended AWG 24-18?
  While the connector is designed for AWG 24-18 wires, it's possible to use smaller or larger wires with proper derating. Consult the WAGO wire sizing chart and application notes for guidance on wire size selection and derating.
• What is the maximum operating temperature for this connector?
  The 235-452/331-000 connector is rated for operation in temperatures ranging from -40°C to 125°C. However, the temperature rating may vary depending on the specific application and environmental conditions.