The recommended land pattern for the 2861001502 inductor is a rectangular pad with a minimum size of 50 mils x 30 mils, with a non-solder mask defined (NSMD) pad shape to ensure proper soldering.
The 2861001502 inductor has a maximum operating temperature of 125°C. Ensure good airflow around the component, and consider using a heat sink or thermal interface material if the inductor will be operating near its maximum temperature rating.
The self-resonant frequency (SRF) of the 2861001502 inductor is not explicitly stated in the datasheet, but it can be estimated using the inductor's inductance and capacitance values. A rough estimate can be made using the formula: SRF ≈ 1 / (2 * π * sqrt(L * C)), where L is the inductance and C is the capacitance.
The 2861001502 inductor is suitable for high-frequency applications up to several hundred kHz. However, its performance may degrade at very high frequencies (e.g., above 1 MHz) due to the inductor's internal capacitance and resistance. Be sure to evaluate the inductor's impedance and loss characteristics at the desired frequency.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 270°C, and apply a small amount of solder paste to the pads. Use a soldering technique that minimizes the risk of overheating the component, and avoid applying excessive force or pressure to the inductor during soldering.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
2861001502 Overview
Use the download button to access the 2861001502 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like 28610,
or try a keyword search, such as Data Line Filters
