The recommended operating temperature range for the 2N5484 is -55°C to 150°C, although the datasheet only specifies a range of -55°C to 125°C for certain parameters.
To ensure the 2N5484 is properly biased for linear operation, you should ensure that the base-emitter voltage (Vbe) is between 0.6V and 0.8V, and the collector-emitter voltage (Vce) is at least 1V greater than the base-emitter voltage.
The maximum power dissipation of the 2N5484 is 1.5W, but this can be increased to 3W with proper heat sinking.
Yes, the 2N5484 can be used as a switch, but it is not recommended due to its relatively low current gain (hFE) and high saturation voltage (Vce(sat)). A dedicated switching transistor like the 2N3904 or 2N2222 would be a better choice.
To protect the 2N5484 from ESD, you should handle the device with an anti-static wrist strap or mat, and ensure that the circuit board is properly grounded. You can also add ESD protection diodes or resistors to the circuit to prevent damage.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
2N5484 Overview
Use the download button to access the 2N5484 schematic symbol and PCB footprint.
