Please enter a minimum 3 letters or numbers
Technical Content
Part Image

3.000.465 - Sensirion

Description: 4 th Generation, High-Accuracy, Ultra-Low-Power, 16-bit Relative Humidity and Temperature Sensor

Download 3.000.465 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
3.000.465 - Sensirion - PCB symbol
click to zoom
PCB Footprints
3.000.465 - Sensirion PCB footprint - Other - Other - 3.000.465-2
click to zoom
3D Models
3.000.465 - Sensirion - 3D model - Other - 3.000.465-2
click to zoom

3.000.465 Details

  • Manufacturer Part Number:

    3.000.465

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Switzerland

  • Manufacturer:

    Sensirion

  • YTEOL:

    6

  • Sensors/Transducers Type:

    TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL

3.000.465 Frequently Asked Questions (FAQs)

  • The recommended operating voltage for the SHT30 is 2.15V to 5.5V, with a typical voltage of 3.3V.
  • To enter sleep mode, set the chip select (CS) pin high and hold it for at least 1 ms. To wake up the sensor, set CS low and wait for 1 ms before sending commands.
  • The maximum cable length for the I2C interface is 10 meters (33 feet), but it's recommended to keep the cable length as short as possible to minimize signal degradation.
  • The SHT30 is factory-calibrated, and no additional calibration is required. However, you can perform a reset command to restore the sensor to its factory settings.
  • The response time of the SHT30 is typically 4-6 seconds for temperature and 6-12 seconds for humidity, depending on the measurement mode and environmental conditions.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

3.000.465 Overview

Use the download button to access the 3.000.465 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 3.000, or try a keyword search, such as Temperature Sensors

Parts related to 3.000.465

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑