Bourns provides a recommended PCB layout and land pattern in their application notes. It's essential to follow these guidelines to ensure proper thermal management, minimize parasitic inductance, and optimize performance.
To minimize electromagnetic interference (EMI), keep the inductor at least 5 mm away from sensitive components. You can also use shielding techniques, such as copper tape or mu-metal shielding, to contain the magnetic field.
While the datasheet specifies a maximum rated current, it's essential to consider the voltage across the inductor as well. As a general rule, keep the voltage across the inductor below 1.5 times the maximum rated voltage to prevent saturation and ensure reliable operation.
The self-resonant frequency (SRF) is typically not specified in the datasheet. To determine the SRF, use a network analyzer or impedance analyzer to measure the inductor's impedance vs. frequency. Then, design your circuit to avoid operating near the SRF to prevent unwanted resonances.
The 3314G-2-503E has a maximum operating temperature of 125°C. Ensure good airflow, use thermal vias, and consider heat sinks or thermal interfaces to keep the inductor within its specified temperature range. Also, derate the inductor's current rating according to the temperature derating curve provided in the datasheet.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
3314G-2-503E Overview
Use the download button to access the 3314G-2-503E schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 3314G,
or try a keyword search, such as Variable Resistors
